Catalog

LIGHT BOX made of composite material with inlaid or cut-through letters.

This type of light box is interesting in that the background part at night remains not light, but only letters, a logo or some other image glow. This type of box includes:

- Frame. It is made from a shaped metal pipe;

- The front part. With letters cut through: an aluminum-composite panel (ACP) 3 mm thick, in which the necessary text and / or image is milled, then acrylic glass (transparent or pasted over with a colored film) is glued inside the sign body. Inlaid: This is the milling of the required text and / or image on an aluminum-composite panel (ACP) 3 mm thick. Next, the Inlay of the elements itself is performed. The necessary elements are cut out by laser cutting from acrylic glass with a thickness of 5 to 20 mm, this gives a special accent to the light elements. When letters are inlaid, the sides and ends of the letters glow and differ in their glow from the front. The difference from letters with milling through the light is that the letters with inlaid, due to their thickness, protrude from the front of the sign, and the ends of these inlaid elements give light. Inlaid signs are more difficult to make, but have a more attractive and tempting look compared to cut-through letters.

- Casting of the box. It is made of 3 mm aluminum-composite panel (ACP).

- Back wall of the box. It can be made, depending on the size of the box, from PVC 5 mm, ACP or galvanized metal. LED modules are installed on the back wall, inside the box.